Instructions

Step 1: Apply a small amount of polish to a dry GMS applicator or a cotton terry cloth.
Your metal fixture must be dry when you apply and then polish with the grain of the brass

Step 2 : Buff surface with a clean micro-fiber or cotton terry cloth in a light rapid motion
(creating friction). This burnishing action will harden the polish and create a
surface difficult to smudge or discolor

Step 3: Enjoy the refreshed look of your fixtures

Note: When applying GMS polish to gold or platinum plated surfaces – use a less vigorous touch in the application as these two finishes are delicate and need to be treated with care.